Material Specs: (vinyl used for print jobs and other industrial uses)
1.0mil, 1.5mil or 2.0 mil print-treated metallized polyester films coated with 200-4986 permanent acrylic pressure sensitive adhesive on a 90# layflat liner.
These films are designed to accept a variety of UV curable and solvent-based screen inks. May also be used with flexographic, offset and letterpress inks but must be tested prior to production.
Applications: Solar Burner Parabolic, Permanent decorative decals, product identification markings, point of purchase decals, and consumer information labels. Recommended for use on flat smooth substrates. Thoroughly test if substrate is textured or has curvature.
Thickness: Film 1.0, 1.5 or 2.0 mils. Adhesive 0.8 to 1.0 mil. Liner 6.7 mils. (Thickness variance +/- 10%)
Dimensional Stability: Good.
Temperature Ranges: Minimum application temperature is +50°F. Service temperature is -40°F to +250°F.
Expected Exterior Life: Up to 2 years continual use and sun exposure.
Adhesion: To stainless steel 40 oz/inch. To painted metal 40 oz/inch. Tested according to PSTC-101 Method A, with a 24 hour dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
Water Resistance: Limited resistance. Test for specific application
Humidity Resistance: Good.
Storage Stability: 2 year shelf life when stored at 70°F and 50% relative humidity.
Reflectance rate: Reflectivity ratio is 86%, allowing for a high and effective solar ray concentration.
The best way to apply the vinyl, according to the professionals, is to wet the substrate with a "water and very light soap concentration"; allowing you to move the vinyl around similar to the method used in putting up wallpaper. When you have the adhesive vinyl situated where you like, then you can use a rubber or plastic squeegee or painter's spatula to force the water out from under the vinyl and then you can allow it to dry and to adhere to the surface.
We are one of many resellers of Solar Ovens, cookers and supplies on the market, so we promise to do our best to give you a quality purchasing experience as well as our 100% fully backed product guarantee included with all solar cookers and other supplies that we offer on our site.
You can try the cookers for 180 days (6 months)90 days for supplies and accessories, and if you are not fully satisfied we will refund the full price of your cooker(supplies).Conditional Restrictions apply